Datamax-O'Neil LP3 LABEL PRINTER User Guide - Manual (Page 18)

LP 3 LABEL PRINTER USER'S GUIDE
15
Using the Control Panel
The tables on the following pages document the following:
•
Audio Indicators on page 15
• Battery Status LED on page 16
• Power Button/LED on page 17
• Media Function Button/LED on page 17
• Radio Button/LED on page 18
Audio Indicators
Beep(s) Description Action
1 short Printer wakes up. None.
2 short Out of paper. Install paper.
3 short Low battery. Charge battery.
1 very short RF power is on.
Note: This beep occurs when
you press the RF power button
and the RF power was off.
None.
2 very short RF power is off.
Note: This beep occurs when
you press the RF power button
and the RF power was on.
None.
1 long Boot code is starting or
restarting. Redownload firmware.
8 short CRC error in firmware. Redownload firmware.
Media Function
Button/LED
Radio
Button/LED
Power Button/
LED
Battery Status
LED