Installation, Remove the front cover by pulling out the shaft, Fasten the label taken sensor assembly – Datamax-O'Neil MP Compact4_MP Compact4 Mobile Mark II Label Taken Sensor Option User Manual
Page 3
Advertising
Installation
1. Remove the front cover by pulling out
the shaft.
2. Drill out the hole with 2.5 mm drill bit.
Remove any metal shavings.
3. Fasten the Label Taken Sensor
assembly.
4. Attach the cable with screw, washer
and cable clamp.
5. Connect the cable to the Label Taken
Sensor connector.
1
3
2
4
5
4
2
Advertising