Datamax-O'Neil Netcenter User Manual - Manual (Page 11)

User Manual
4. Operation
4.2 Telnet
Opens the standard Windows Telnet client and connects to the
selected printer on its Telnet port (port 23). From here it is
possible to send Labelpoint commands.
If the selected printer already is using another port to receive
Labelpoint commands then the printer will not listen on the Telnet
port for Labelpoint commands until the Labelpoint command “!C”
is sent to the already active port. Refer to the Labelpoint manual
for more information about port handling and Labelpoint
commands.
4.3 FTP
This will open your system’s default FTP client and automatically
connect to the selected printer’s FTP server. Refer to the
Labelpoint manual for more information about file management.
Note : The embedded FTP server in the printers does
not support passive mode. Be sure to use active mode
when accessing the FTP server.