Datamax-O'Neil Netcenter User Manual - Manual (Page 14)

User Manual
4. Operation
4.6 Clear
Removes the selected printer(s) from the list.
4.7 Clear All
Removes all printers from the list, no selection can be made.
4.8 Upgrade
Opens a dialog window where a printer firmware configuration file can be selected,
see figure 4. To be able to upgrade any printer(s) two requirements must be fulfilled.
First, a NetCenter firmware bundle is needed, which can be downloaded from the
Datamax-O’Neil website at
www.datamax-oneil.com . Second, all printers selected
must be connected and have a valid IP address.
Note : The option to upgrade printer firmware is supported by Compact
and Nova printers using Printcore 5.1.19 or later.
Figure 4. Firmware file dialog