Datamax-O'Neil Labelpoint Programmer’s Manual - Manual (Page 53)

PROGRAMMER’S REFERENCE MANUAL
Printer settings
Page 49
151
4
<n> TCP port for COM1. Valid when communication mode is set to terminal
server mode. See parameter 150.
See section ‘Communication ports’ for further information.
152
4
<n> Communication mode for COM2. Valid values for n are {0, 1, 2} and they are
interpreted as follows:
0 = Print mode (Labelpoint, default)
1 = Terminal server mode
2 = Terminal client mode
3 = RF-ID mode
4 = Stacked printers mode (daisy chaining)
See section ‘Communication ports’ for further information.
153
4
<n> TCP port for COM2. Valid when communication mode is set to terminal
server mode. See parameter 152.
See section ‘Communication ports’ for further information.
156 <n> Flow control for COM1. Valid values for n are {0, 1, …, 4} and they are
interpreted as follows:
0 = both rts/cts and xon/xoff (default)
1 = rts/cts
2 = xon/xoff
3 = none
4 = disabled
157 <n> Flow control for COM2. Valid values for n are {0, 1, …, 4} and they are
interpreted as follows:
0 = both rts/cts and xon/xoff (default)
1 = rts/cts
2 = xon/xoff
3 = none
4 = disabled
162
6
<n> Reverse video mode for text fields. Valid values for n are {0, 1, …, 100} and
they are interpreted as follows:
0 = reverse video mode off
1 = reverse video mode on