AEG MC2662E User Manual

Page 4

Advertising
background image

4

Important safety instructions

Important safety instructions

Important safety instructions: Read carefully and
keep for future reference

To avoid the danger of fire

The microwave oven should not be left unattended during operation.
Power levels that are too high or cooking times that are too long may overheat foods
resulting in a fire.

The electrical outlet must be readily accessible so that the unit can be unplugged easily in
an emergency.
Do not store or use the oven outdoors.

If food being heated begins to smoke, DO NOT OPEN THE DOOR. Turn off and
unplug the oven and wait until the food has stopped smoking. Opening the door while
food is smoking may cause a fire.
Only use microwave-safe containers and utensils.
Do not leave the oven unattended when using disposable plastic, paper or other
combustible food containers.
Clean the waveguide cover, the oven cavity, the turntable and turntable support after
use. These must be dry and free from grease. Built-up grease may overheat and begin to
smoke or catch fire.

Do not place flammable materials near the oven or ventilation openings. Do not block
the ventilation openings.
Remove all metallic seals, wire twists, etc., from food and food packages. Arcing on metallic
surfaces may cause a fire.
Do not use the microwave oven to heat oil for deep frying. The temperature cannot be
controlled and the oil may catch fire.
To make popcorn, only use special microwave popcorn makers. Do not
store food or any other items inside the oven.
Check the settings after you start the oven to ensure the oven is operating as desired. See the
corresponding hints in this operation manual.

To avoid the possibility of injury

Warning!
Do not operate the oven if it is damaged or malfunctioning. Check the following before
use:
a) The door; make sure the door closes properly and ensure it is not misaligned or
warped.

b) The hinges and door safety latches; check to make sure they are not broken or loose.
c) The door seals and sealing surfaces; ensure that they have not been damaged.
d) Inside the oven cavity or on the door; make sure there are no dents.
e) The power supply cord and plug; ensure that they are not damaged.

Advertising