AT&T 1460 - Manual (Page 35)

3 2
F E ATURE SUMMARY
Default settings indicated by * .
SYSTEM ANNOUNCES: DESCRIPTION/DIRECTIONS:
“Change announcement” Allows you to record your
personal outgoing announcement.
See instructions on page 30.
“Change remote access code” Set the remote access code you
50*
will use to access features and
functions of the answering system
from a touch tone phone.
“Change message alert” When Message A l e rt is turned on,
Off * the base beeps once eve ry 10
On seconds when new messages have
been received.
“Change announce only” When you turn Announce Only
Off * on, callers hear your
On announcement but cannot leave a
message.
“Change base ringer” Turn the base ringer on or off.
On *
Off
“Change number of rings” Choose how many times the
2 phone will ring before the system
4* answers a call. With Toll Saver
6 active,the system answers after two
Toll Saver rings when you have new messages
and after four rings when you have
no new messages.
¥
NOTE: Exit Feature Setup at any time by pressing a MBOX/STOP
button.
91-5387-30-00_ATT1460_R1 2003.3.27 10:21 AM Page 32