AT&T 9110 User Manual
Installa tion, User’s manual for cordless telephone 9110
PHONE indicator
goes on while you
are on a call.
MUTE/LOWBATT
indicator goes on when
battery needs to be charged,
or the Mute function has
been activated.
Ends a call.
Speed dial your
first memory dial
number.
Accesses memory
dialing numbers.
Redials last
call made.
Mute
Access
Call Waiting or
other services.
Temporary Tone
Puts a caller on hold.
Handset
Volume Control
Makes a call.
Programs a number
in memory or
changes ringer type.
Belt Clip—
Slide over the
back of the handset
until it snaps
firmly in place.
INSTALLA
TION
Part 2
© 1998 Philips Consumer Communications L.P. All rights reserved.
Printed in China. 848233334 Issue 1AT&T
User’s Manual
for Cordless Telephone 9110
Fold open this manual for information about
this telephone’s installation and operation.
Please read Part 1 — Important Product
Information, included in this package.
Headset Jack
2
2
Document Outline
- INSTALLATION
- TELEPHONE OPERATION
- MEMORY
- BATTERIES
- IN CASE OF DIFFICULTY
- If the phone does not work at all, check these items first:
- If you hear noise or interference when using the phone:
- If the phone does not ring when you receive a call:
- If you hear other calls while using the phone:
- If you hear noise in the handset, and the buttons don’t work:
- If you are unable to operate special telephone services or other equipment requiring touch tone signals:
- If you have difficulty entering numbers into Memory:
- IMAGES