Dynasonics TFXP Series Transit Time Ultrasonic Flow Meter - Manual (Page 17)

Rev. 5/09 -1.15- TFXP
A 200,000-point Data Logger* is located within the weather-tight
pocket on the faceplate of the flow meter. See Figure 1.7. Loosen
the three thumbscrews located in the corners of the pocket cover
and rotate the cover to expose the Data Logger Module. The
logger stores time-stamped, high resolution (16-bit) data at user
selected intervals ranging from 1 to 30,000 (8.33 hours) seconds.
Configuration of and data retrieval from the logger can be
accomplished in one of two ways:
• The module is removable. The
module can be carried in a shirt
pocket back to the office and plugged
into a PC serial port via the module’s
integral DB-9 connector.
• The Data Logger software utility,
Data Logger, and the serial DB-9
interface cable included with the
logger can be used to access the
data. The data logging software is
loaded at the same time that
ULTRALINK™ is installed. Connect
the cable to the logger, which is
located in the pocket on the front
faceplate of the instrument. See Figure 1.7.
Refer to Part 3 of this manual for detailed information regarding the
configuration and operation of the Data Logger Module.
*The 200,000 points can be divided into 16 unique files that
each may contain up to 30,000 events.
There are five additional optional ISO-Mods available in
replacement of the standard 4-20mA output. If interested in one of
these optional ISO-Mods, please contact Dynasonics sales at
800-535-3569 or 262-639-6770 for detailed information.
PART 1 - TFXP TRANSMITTER CONNECTIONS
Optional
Data Logger
Figure 1.7 —
Data Logger Location
Other
Optional
ISO-Mods