DE DIETRICH NEO 2.1 - Manual (Page 7)

2 Safety instructions and
recommendations
2.1 Safety instructions
DANGER
The permissible roof load of the building must not at any
time be exceeded. If necessary, a structural engineer
should be consulted before commencing work.
WARNING
All electrical work must be carried out by a qualified
electrician and must conform to the applicable standards,
specifications, safety regulations and the requirements of
the local electricity supplier.
CAUTION
Do not neglect to service the appliance. Contact a qualified
professional or take out a maintenance contract for the
annual servicing of the appliance.
2.2 Recommendations
WARNING
4
Any operation on the installation must be performed
by a qualified technician respecting professional
regulations and in accordance with this document.
4
When making the connections, it is imperative that
the standards and corresponding local directives are
respected.
4
The flat solar panels and fittings should be handled carefully during
transportation and storage. If the packing has nevertheless been
damaged during transit, the damage must be reported
immediately to and claimed against the carrier.
4
The contents of the assembly kit must be checked before
installation against the list which accompnaies each kit.
4
When installing the panels, take note of the safety instructions in
this document.
4
The packing material should be properly disposed of after
installation.
4
Insulate the pipes in rooms that are not heated (cellars and lofts).
4
Check regularly that the installation contains water and is
pressurised.
NEO 2.1 / SUN 211 2. Safety instructions and recommendations
05/10/09 - 300020210-001-B 6