DE DIETRICH AD281 - Manual (Page 20)

3.3.8. Setting an annual clock
The annual clock is used to programme up to 10 heating stop periods
over one year. The circuits selected for this stop are in Antifreeze
mode during the period chosen.
1. To access user level: Press the > key.
2. Select the menu #ANNUAL PROG.
4
Turn the rotary button to scroll through the menus or
modify a value.
4
Press the rotary button to access the menu selected
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 11.
3. To select the desired parameter.
OFF No stop
B circuit B
C circuit C
B+C circuit B, C
SU DHW circuit
B+E circuit B and DHW
C+E circuit C and DHW
ALL circuit B, C and DHW
4. Set the start date and the end date of the shutdown selected.
5. To deactivate a shutdown, select the shutdown and set to OFF.
6. To select another shutdown, press the ' button.
Annual programme (Factory setting)
Stop no. Circuit concerned Start date End date
1
OFF 01-01 01-01
2 OFF 01-01 01-01
3 OFF 01-01 01-01
4 OFF 01-01 01-01
5 OFF 01-01 01-01
6 OFF 01-01 01-01
7 OFF 01-01 01-01
8 OFF 01-01 01-01
9 OFF 01-01 01-01
10 OFF 01-01 01-01
For example: Customised programming
Stop no. Circuit concerned Start date End date
1
AC 01-11 10-11
2 AC 20-12 02-01
If setting STOP: OFF, the stop is deactivated and the start and end
dates are not displayed.
bar
1
1
2
2
D
STD
J I
E
0 2 4 6 8 10 12 14 16 18 22 24 20
# F
AUTO % $
<
:  !
SUNDAY 11:45
C002219-D-04
3. Operating the appliance VM iSystem
19 17/11/2011 - 300028026-001-A