eLine Technology ECO3 DvrSeeSee Manual - Manual (Page 5)

Device Settings
Channel ID: This will
indicate which channels
settings you are about to
change.
Channel Name: In this
section you can alter the
channels name which will
be displayed instead of the
channel number.
Resolution: From this
section you can change the
DVRs resolution from CIF
to QCIF. Image Quality: From this
section you can change the
image quality 6 options
from "lower" to "highest".
Framerate: Adjusting this
will change the "net
stream" frame rate. The
range is from 1 - 25.
Pressing the menu button (on
Android) will allow you to submit
(save) the settings to the DVR.