eLine Technology ECO3 Restore DVR Guide - Manual (Page 2)

DVR Restore Guide
2/2
this time,the lights in front panel will always blink.If don’t blink,means you had
lose you hand at some time.You need restore again.
7.After one minute,loose loose loose loosen n n n the the the the front front front front panel panel panel panel button button button button.The DVR will reboot by
itself.
8.Then wait about 15 minutes.The DVR is restoring.
9.After that,if DVR restart with Hangbang logo,restoring is finish.
If DVR don’t have image,please disconnect the DVR power supply and
re-connect the power supply. Boot it up again.Then you will see the Hanbang
logo,restore finished.
10.If your DVR shows Chinese language after restored,please switch it to
English by this menu:主菜单->基本设置->语言->English.
11.Then please upgrade your DVR to latest firmware version and latest
browser web control version.
12.If any questions about it,please contact our technical support engineer.