eLine Technology EDC User Manual - Manual (Page 9)

CAMERA ELI‐EDC USER MANUAL eLineTechnology.com
Page | 9
Specifications
Feature Specification
Minimum Illumination 0.001 Lux / 0 Lux (with IR LED ON)
S/N Ratio More than 50dB
Scanning System 2:1 Interface
Synchronous System Internal, Negative sync
Auto Electronic Shutter NTSC: 1/60s~1/100,000s / PAL: 1/50s~1/100,000s
Gamma Characteristic 0.45
IR Distance 20 Meters (with ȼ5x21 pcs Infrared LED)
Video Output 1Vpp. 75Ω
Auto Gain Control Auto
Power/Current DC 12V (+/‐10%) 350mA
Dimension ȼ127 x 95(H) mm
Weight 520g
Storage Temperature ‐30°~60°C RH 95% Max
Operating Temperature ‐10°~45°C RH 95% Max
Troubleshooting
No picture after providing power
 Check the power connection to the power supply to the power outlet for connectivity.
 Check the power supply voltage.
 Check all connecting cable and monitors for loose connections.
 Check the monitor settings
The picture has interference or ripples
 This may be caused by the power supply’s arc, poor quality cable, too long cable, or improper
ground connection.
The picture background color changes continuously
 A fluorescent light’s electromagnetic field may cause color roll. Reduce the number of
fluorescent lights or increase the distance between the camera and the lights to reduce this
effect. Use of a power supply with external sync may solve the problem.
Blurred Image
 Check the dome cover for dirt or imperfections
 Check the focus to make sure adjusted correctly
 Check the lens of the camera to make sure it is clean. Only use a dry, clean lens cloth to clean
the lens. Never touch with your fingers.