eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 51)

51
Devices are listed under Unallocated Equipment without verification of their presence on the
network. To refresh these lists, you must launch a device search (by using the
button).
Creating Device Objects Manually
You can create objects in EyStream either by using the
tools located above
the object tree or by using the
link, depending on the object type. You can then
configure the objects and save changes.
Note
If the settings of a newly created object are not saved, the , icon will appear
on the tab, literally indicating that the changes to the tab have not been saved.
Then, when you are exiting the program, a message will appear, asking whether
you want to exit without saving changes
Object search
EyStream allows you to search for objects in the objects tree using only part of their name. An
object search can be performed on all tabs under Devices.
To search for objects, complete the following steps:
1. Select the tab containing the object tree that you need to search
2. Enter the full or partial name of the object in the Search… box.
Note
Search is not case-sensitive
Note
A search can also be run based on object ID
The search starts automatically once you enter something in the box. When the search is
complete, you will see the number of objects found in the tree, along with the currently displayed
search results highlighted in beige.
eLineTechnology.com 303.938.8062