eLine Technology PRO3 Effio E - Manual (Page 12)

21 22
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
OSD function joystick. Pressing down
on joystick acts as ENTER function.
RCA Service Connector
Use supplied RCA - BNC cable
If you require BNC output.
LANGUAGE
LENS
• AUTO
• MODE • SPEED
• MANUAL
SHUTTER / AGC
• MODE • BRIGHTNESS • AGC
WHITE BAL • ATW
• SPEED • DELAY CNT • ATW FRAME • ENVIRONMENT
• PUSH • USER1 • USER2
• B-GAIN • R-GAIN • RETURN
• ANTI CR • MANUAL ATW • PUSH LOCK
DAY / NIGHT • AUTO • COLOR • B/W • EXT1 • EXT2
• BURST • DELAY CNT • DAY - NIGHT • NIGHT - DAY • RETURN
PICT ADJUST • MIRROR • BRIGHTNESS • CONTRAST • SHARPNESS • HUE • GAIN
NR
• NR MODE • Y LEVEL • C LEVEL
MENU1 • BACKLIGHT
• D-WDR
PRIVACY • AREA SEL • TOP • BOTTOM • LEFT • RIGHT • COLUR • TRANS • MOSAIC
MOTION DET • MOTION DET • DETECT SENSE • BLOCK DISP • MOTION AREA • RETURN
CAMERA ID
SYNC
• PHASE
CAMERA RESET
EXIT
• SAVE ALL
NOTE: Day / Night should be set to EXT1 on models supporting IR LEDs
MENU TREE SUMMARY
OSD MENU control
Press down on the function joystick to access the setup menu.
• Main setup menu is displayed on the monitor screen.
SETUP MENU
SETUP MENU
LANGUAGE ENGLISH
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
DAY/NIGHT AUTO
PICT ADJUST 
2DNR 
NEXT
EXIT SAVE ALL
Select a function by moving the joystick up and down and move left or right to
change setting value and press joystick to confirm selection.
If a menu option features a  , a sub menu is available which can be accessed
by pressing down on the joystick.
Select ‘NEXT  ’ to view remainder of the OSD setup menu
Once finished updating settings, highlight ‘EXIT’ and press down on the joystick
to exit setup menu.
To retain the changed settings after a power on/off of the camera you need to
select SAVE ALL option on the menu.
LANGUAGE
SETUP MENU
LANGUAGE ENGLISH
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
DAY/NIGHT AUTO
PICT ADJUST 
2DNR 
NEXT
EXIT SAVE ALL
Select the language in which to display the OSD menu.
Note: Selection changes the language displayed immediately.
The OSD control may differ from show above, OSD buttons may re-
place the joystick type. Service cable output maybe not be available,
and maybe optionally supplied with the product.