eLine Technology SIP Sensor Configure IT1 MegaPixel CCD - Manual (Page 2)

3. Shutter
Shutter mode includes 2 modes: fixed and auto shutter,.choose”on”, shutter adjusts automatically during
the max and min; choose” off”, fixed shutter is available to be adjusted.
4.DayNight Mode
1).D/N setting includes 3 modes, off: image keeps color both day and night time; auto: cameras
switch color or B&W according to again; EXT: external signal trigger change from color to B&W. e.g.
megapixel IR bullet camera (SN-IPR5450 series works with EXT mode. When set as auto, maxGain
value should be set bigger than TRANS (D->N), otherwise it will not switch to B&W; if cameras keep
switch between color and B&W modes, enlarge the values between TRANS(D->N) and
TRANS(N->D) .
2).MaxGain: adjust the maximum of gain. When outside light is not adequate, increase Gain to
increase brightness, but noise will be also more, decrease MaxGain will decrease noise, brightness
will be also down.
3).TRANS (D->N). the gain value that color change to B&W. when D/NSetting set as auto, cameras’
gain is more than the set value of TRANS(D->N), cameras will switch to B&W.
4).TRANS (N->D): the gain value that color change to color. when D/NSetting set as auto, cameras’
eLineTechnology.com 2