eLine Technology SIP-FB - Manual (Page 12)

13 14
Configuring Connection
5.1 Connecting to a DDNS address using NVMS
NOTE: Complete all the steps above before performing the following
method.
1. Open NVMS and click Device Manager>Video Device Manager.
2. Click Manager. The Device Maintenance window opens.
Enter the
camera’s
DDNS address
Control
Port
Click Add Click Save
3. Under Device IP, enter the Domain Name from the confirmation email.
For example, enter mycamera.dyndns,org.
4. Under Control Port, enter the camera’s control port (default: 30001).
5. (Optional) Under Device Name, enter a name for the camera.
6. Click Add to add the camera to the Device List.
7. Click Save to save changes. Click OK.
Configuring Connection
Step 5 of 6: Enable DDNS on the camera:
1. Enter the camera’s IP address in your web browser. Log in and then click
Network Service>DDNS.
2. Check Enable DDNS.
3. Configure the following:
• Provider: Select the ddns service you use..
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account
(e.g. mycamera.dyndns.org).
• User Name: Enter the User Name.
• Password: Enter the account name Password
4. Click OK to save settings.
Step 6 of 6: Connect to the camera’s DDNS address:
1. Enter the camera’s DDNS address in your web browser in the following
format:
http://
http://mycamera.dyndns.org:80
Colon
DDNS address HTTP port number
2. Under User Name and Password, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
Once you have logged into your system using your DDNS address, you can
connect to the IP camera from a remote location using a web browser,
NVMS.
eLineTechnology