eLine Technology SIP-FB - Manual (Page 9)

7 8
Finding the Address
4. Click on a camera IP address in Device List to login.
5. Under User Name, enter the user name for the camera (default: admin).
Under Password, enter the password for the camera (default: admin).
Click Continue.
Enter Camera User Name
(default: admin)
Enter Camera Password
(default: admin)
Click Continue to login
6. The camera appears under the camera IP address. Click and drag the
camera to the display grid to open it.
Click and drag the
camera to the display
grid to open it
NOTE: For detailed instructions on using NVMS, see the NVMS
manual on the CD.
4.2 Finding the Camera’s IP Address using UPnP in
Windows® 7
NOTE: To use this method, your router must support UPnP and the camera
and computer must be on the same network. UPnP is enabled in the camera
by default, and can be enabled/disabled using NVMS (check the NVMS
manual for details).
Finding the Address
4. FINDING THE CAMERA’S IP ADDRESS
Use the steps below to find the camera’s IP address and connect to the
camera over the local area network (LAN) using NVMS, UPnP on
Windows® 7, or Bonjour® in Mac OS®.
4.1 Finding the Camera’s IP Address Using NVMS
1. Install NVMS from the CD. Now Double-click the NVMS icon ( ) on the
Desktop. The log in screen appears.
2. Under User Name and Password, enter the default NVMS user name
( admin) and password (admin). Click Login.
Enter Admin
Enter Admin
Click Login
3. NVMS opens and scans the local network for connected cameras.
Detected camera IP addresses on the LAN appear in the Device List on
the left side of the screen with a
icon.
Found camera
IP address
eLineTechnology