eLine Technology HDSDI-412 - Manual (Page 14)

14
Tick off record channel, channel audio.
User can setup all channels with same parameters, tick off “All”, then to do relevant
setup.
Click “Default” button to resort default setting; click “Apply” button to save the setting;
click “Exit” button to exit current interface.
Video parameters instruction
2.4.3.2 Record bit rate
Pic 2-12 Record bit rate
Setup rate, resolution, quality, encode and max bit stream
User can setup all channels with same parameters, tick off “All”, then to do relevant
setup.
Click “Default” button to resort default setting; click “Apply” button to save the setting;
click “Exit” button to exit current interface.
2.4.3.3 Record stream introduce
Stamp：
User can overlap the channel name and time stamp on video
.
Parameter Meaning
start Every channel record switch
audio Start use the channel record audio
Parameter Meaning
Fps Range from 1-30（NTSC）1-25(PAL)
Resolution Support 1080P、720P
Quality
The higher the value is, the clearer the
Recorded image is. Six options：lowest,
lower, low, medium, higher and highest.
Coding Support CBR and VBR
Max bitrate
Select range：256 Kb、512Kb、
768Kb,1024Kb,2048Kb,3072 Kb,
4096Kb,5120 Kb,6144 Kb,7268 Kb,
8192 Kb
eLineTechnology.com