EXP Computer DVD-780 - Manual (Page 10)

- 11 -
Please note that it is not necessary to connect the PCMCIA DVD-ROM
every time you reboot your computer; connect it only when you need to use
it.
Installing the PCMCIA DVD-ROM Under Windows 95 (Older
Versions)
If you are using the PCMCIA DVD-ROM under Windows 95 for the very
first time, and your Windows 95 is version 4.00.950 or 4.00.950a, the
following dialog will appear.
(If the dialog box does not appear and the CD-ROM folder can not be
found in My Computer, please refer to the section titled “Enabling 32-bit
Card Support”.)
Select “Driver from disk provided by hardware manufacturer” and click the
OK button. Windows 95 will then prompt you to insert the manufacture’s
installation disk. Insert the PCMCIA DVD-ROM device driver disk into
your floppy drive. Specify the directory as A:\ (or B:\ whichever contains