EXP Computer DVD-780 - Manual (Page 17)

- 18 -
Playing an Audio CD by CD Player Utility in Windows 95
1. Connect the 3.5mm stereo audio cable from the Line-Out Jack of your
DVD-ROM to your notebook’s Line-In Jack or to an self-amplified
speaker.
2. Make sure the CD Player utility has been installed in your Windows
95. If not, please go to My Computer\Control Panel\Add/Remove
programs and click the Windows Setup\Multimedia to add the CD
Player utility.
3. Place an Audio CD in your DVD-ROM.
4. The CD Player will then automatically play the audio CD.
Hot-Insert/Remove feature of the PCMCIA DVD-ROM
The PCMCIA interface, ideally you can hot-insert/remove the PCMCIA
interface card, which means to insert, remove or exchange the card from
your system at any time without rebooting or turning off your system.
However, the PCMCIA DVD-ROM, being a storage device itself, can not
be hot-removed when it is accessing the data. To avoid system failure, read
the following instructions carefully before using the hot-removing feature.
For Windows 95, hot-swapping is allowable with more limits. To avoid
system failure, always follow the steps below to hot-remove the PCMCIA
DVD-ROM in Windows 95,
1. Click the PC card indicator on the task bar at the bottom right of the
screen.
2. Click the command to stop the card you want to remove.
3. When the screen prompts, read the instruction carefully. If the system
prompts you not to remove the card, DO NOT remove the card. You
should exit the present application and return to step 1.
Be sure you are removing the card by the procedures described above,
otherwise, the following dialog will be displayed: