FlexLink X85 Модуль комбинирования XBUТ 45СR,90CR,45CL,90CL Руководство пользователя - Manual (Page 7)

X85 Pallet
Cylinder details
Cylinder A1 and A2 ”Pre-stop”
Type: Single acting with two ports.
Function:
Pressurized: Releases the pallet flow
No pressure: Blocks the pallet flow
For safety reasons, the pallet stop is blocking the flow in
case of a pressure drop, preventing pallets from travelling
uncontrolled along the conveyor.
The stop should not re-block the flow while a pallet puck is
in a position where it could be clamped.
It is recommended to re-block the flow after each pallet. Cylinder A1 and A2
Cylinder A3 ”Arm”
Type: Double acting
Function: Change the flow through the module.
Note 1: It is recommended that flow control valves are
used, for example Festo GR-QS-6 (193969).
Cylinder A3