Flowline LI40-1001 PodView - Manual (Page 10)

10 of 16 MN204260 Rev A
UNDERSTANDING PODVIEW® Step Six
Relay Settings: PodView® not only displays the level reading of the EchoPod® (Height or Volume), but
PodView® also allows you to adjust the settings for relays. PodView® will not allow changes to Sensor Height
or Fill‐Height, just the relay settings.
EchoPod® configured to read inches of liquid plus 4
high alarm relays. EchoPod® configured to read inches of liquid plus
duplex relays and high and low alarm relays.
EchoPod® configured to read gallons of liquid plus 2
high alarm and 2 low relays. EchoPod® configured to read gallons of liquid plus an
auto empty relays and high and low alarm relays.