Burkert Type 6608 User Manual
Page 7
24
note!
If the tightening torque is too great, the device may
be damaged!
Observe the maximum tightening torque of the screws!
•
Attach valve to manifold:
→
Screw in screws at 0.8 Nm.
Tightening torque
0,8 Nm
Attach coil to body.
→
english
25
Danger!
Risk of electric shock if the protective conductor
function is defective!
After installing the coil, check the function of the pro-
•
tective conductor (see chapter entitled “
8.3. Electrical
Installation”).
Dimensional drawing for manifold:
27
18
M3 min. 6 deep
13.5
max. ∅4
NC IN/OUT NO
18
45.5
44
max. ∅4
M3 min. 6 deep
11
M4 min. 6 deep
Flange layout for
manifold mounting
Flange layout for
single mounting
with clamp
english
25
26
Arrangement of the bores:
3-way
2-way
english
27
8.3. electrical installation
Danger!
Risk of injury due to electrical shock!
Before reaching into the device or the equipment,
•
switch
off the power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety
•
regulations for electrical equipment!
Types of electrical connections:
Rectangular
plug
Flying leads
Circular plug
Connection above
english
27
Type 6128, 6608