Burkert Type 6212 - Manual (Page 7)

24
Valve does not close
Possible cause:
Internal space of the valve is dirty, •
Diaphragms defective. •
english 25
spare parTs 9.
Caution!
Risk of injury and/or damage by the use of incorrect
parts!
Incorrect accessories and unsuitable spare parts may
cause injuries and damage the device and the sur-
rounding area.
Use original accessories and original spare parts from •
Bürkert only.
Ordering spare parts 9.1.
Spare parts
When ordering replacement parts, quote the pilot valve or
armature and the identification number of the device.
Spare parts see chapter • 9.2.Overview of spare parts.
The identification number of the device can be found on •
the rating plate. See also chapter 6.4.1.Description of
the rating plate.
english
26
9.2. Overview of spare parts
Pilot valve
Armature
Overview of spare parts Fig. 6:
english 27
packaging, TranspOrT, 10.
sTOrage
note!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
During transportation protect the device against wet •
and dirt in shock-resistant packaging.
Avoid exceeding or dropping below the allowable
•
storage temperature.
Incorrect storage may damage the device.
Store the device in a dry and dust-free location! •
Storage temperature. -40 ... +80 °C. •
english
Type 6212