Burkert Type 8605 - Manual (Page 12)

12
Configuration and Function
7. CONFIGURATION AND FUNCTION
7.1. Operating and Display Elements
7.1.1. Operating unit
The operating unit consists of a LCD and keys. It is used for displays and settings of the Control Electronics, Type
8605.
Unit of the displayed value
(s, Hz, %, mA, V)
LCD
Lower limit
= active
= not active
Setpoint = Setpoint
(of the coil current)
Process value = Actual value
(of the coil current)
Upper limit
Figure 3: Operating unit
Key assignment:
Key Display mode Configuration
mode
Selected and confirmed menu item
Switch over the display
value
PV [mA] process value
PV [%] process value
SP [%] setpoint
TV [%] duty cycle
Scroll up
(selection) Increment (increase)
numerical values
Scroll down
(selection) Decrement (decrease)
numerical values
3 sec
Enter configuration mode Confirm the
selected menu item Select and deselect the individual menu
items
Switch between
main-menu and
sub-menu items
e. g.: Out-VALV Confirm set values
english
Type 8605