Burkert Type 8791 - Manual (Page 7)

7
Operation and Function
connecting the programming adapter with the 3.3.
pc and installing the USB driver
3.3.1. downloading the USB driver
Download USB driver
→
“buerkert_usb_to_serial_adapter.inf”.
(download from www.burkert.com Documentation Type 8791 / 8694 / 8696 ).
installing the USB driver 3.3.2.
Connect the USB interface with the PC using the USB cable included with delivery.
→
USB from the PC
Connecting the programming adapter with the PC Figure 2:
The USB interface is reported as “new hardware” on the PC.
The input mask
“Found New Hardware Wizard” appears on the screen.
To install the USB driver, select the procedure
→
“Install from a list or specific location” in the input mask and follow the subsequent prompts of the wizard
(see
Figure 3: ).
Installation of USB driver; software wizard Figure 3:
english
USB interface