Burkert Type 1094 - Manual

1
Information on the replacement
of the electronic control
Description for the replacement of electronic controls
for gas recovery
Important information!
The new electronic control for gas recovery with ident. no. 208373 replaces the previous electronic controls with iden-
tification numbers 191675 and 60651.
The previous control with ident. no. 130561 will also be replaced by the new electronic control, however in con-
junction with the power supply unit (ident. no. 770156).
New electronic gas recovery with ident. no. 208373 Figure 1 :
Pin assignment of the new electronic control, ident. no. 208373
Outputs Inputs
+ 24V
GND
+
–
+
–
+
–
+
–
Ventil 1
Schütz 1
Ventil 2
Schütz 2
GND Motor contactor
control
Side 2
+ Output
GND Valve control
Side 2 + Output
GND Motor contactor
control
Side 1
+ Output
GND Valve control
Side 1 + Output
GND
24 V supply
+ Output
GND
Diesel 2
GND
Impuls 2
GND
Diesel 1
GND
Impuls 1 + Input
Frequency input
Gasoline pulse
Side 1
GND
+ Input Diesel identifier
Side 1 GND
+ Input
Frequency input
Gasoline pulse
Side 2
GND
+ Input Diesel identifier
Side 2 GND
Configuration
Configuration
Pin assignment; new electronic gas recovery with ident. no. 208373 Figure 2 :
The differences between the pin assignment for the electronic controls with old identification number are described below.
© 2010 Bürkert Werke GmbH Supplement 1012/00_EU-ML_00809478 / Original: DE
english
Type 1094