Burkert Type 8741 - Manual (Page 6)

6
Intendeduse
Type 8741
2 inTenDeD Use
improper use of the mfc/mfm may be a hazard to people,
nearby equipment and the environment.
mfm type 8741 is used exclusively to measure the mass flow
of clean dry gases.
mfc type 8741 is used exclusively to control the mass flow of
clean dry gases.
▶ Observe the additional data, operating and service conditions
specified in the contract documents, the manual and on the
nameplate and calibration plate.
the device
▶ Use only for the media indicated on the nameplate and in the
calibration protocol.
▶ Do not use in an outdoor area.
▶ Use only in conjunction with external devices and components
recommended by Bürkert.
▶ Operate carefully and ensure regular, professional maintenance.
▶ Operate only in perfect working order and ensure appropriate
storage, transport, installation and control.
▶ Use only for its intended purpose.
2.1 restrictions
When operating the device, observe any applicable restrictions.
English