Burkert Type 8030 - Manual (Page 7)

7
Technical data
type se30 ex
H
DN (mm) H (mm)
06 96
08 96
15 101
20 98
25 98
32 102
40 106
50 112
65 112
Fig. 4: Dimension H of the device with a female connector type 2513,
available as an accessory, and mounted on a fitting S030
H
DN (mm) H (mm)
15 1) 101
25 116
40 133
50 151
1) Only version with internal thread
connections
Fig. 5: Dimension H of the device with a female connector type 2513,
available as an accessory, and mounted on a fitting S070
6.4 electrical data
Power supply U. 12-36 VDC, filtered and regulated
Consumption (without load) Imax. ≤ 30 mA
Reversed polarity protected
Protection against spike
voltages protected
Protection against short
circuits protected
Transistor outputs 1 x NPN and 1 x PNP, Imax. < 100 mA, fre-
quency 0 to 300 Hz with duty cycle of 1/2
7 Assembly AnD fluIDIc
InstAllAtIon
→
Do the fluidic installation and the assembly as described in the
operating instructions type 8030 provided with the device.
English