ELRO FA703IP Plug & play wifi network camera - Manual (Page 23)

23
On the WAN tab click on the camera you want to manage. The
camera image appears on your smartphone J .
Attention! If you do not have a picture it is possible that your
wireless connection is not fast enough. In that case change the
resolution of your camera image (see section 5.1.1)
The camera screen provides a number of options:
• Click the listen / speak J1 button, in the camera image
headphones and a microphone appear.
• Click on the headphones K to listen to the sound that the
camera is recording.
• Click on the microphone L to speak using the speaker of
the camera.
• Click on the headphones or microphone again to switch
off the aforementioned function(s).
• Click on the Snapshot button J2 to take a picture of your
camera image
• Press the Video button J3 to start recording a video, press the
video button again to end the video recording.
• Click on the PTZ button M to use the control panel. Here you
can mirror the image, you can zoom in and out and refresh the
camera image.
5. Managing your camera using
your smartphone
Make sure your camera(s) is/are connected to your smartphone
via the Flamingo "Plug to view" App (see section 4.1 and 4.2).
5.1. Viewing your camera image on your
Android smartphone
The home screen of the App consists of the following tabs D :
WAN D1 : here you can see all the available cameras.
LAN D2 : here you can see all the available cameras that are
connected via a Wi-Fi connection.
File D3 : all "screencaptures" / photos and videos are saved
here.
Event D4 : here you can see when your camera has been
online and offline and here you can find alarm
reports when movement has been detected.
More D5 : here you can share files with friends, update the
app, learn more about the app, motion detection
and / or switch the Offline Push on or off, and
view information about the storage space on your
smartphone.