ELRO CR1 WLAN Repeater USERS MANUAL - Manual (Page 56)

802.11n WiFi Repeater User’s Manual
56
Resetting to Defaults
If you do make changes to the default configuration but then
wish to revert back to the original factory configuration, you can
do so by resetting the device to factory defaults.
Note
If you reset your device to factory defaults, all previous
configuration changes that you have made are overwritten by the
factory default configuration.
Software Reset:
1. From the left-hand Management menu, click on Reset
factory default. The following page is displayed:
Figure 7: Reset to Defaults page