Gardner Bender CP8006 Powered Cable Puller - Manual (Page 4)

14
12 13 14
15 16 17
18 19 20
Conduit frame adapter resting on floor
and on back of box -- pulling up
Conduit frame adapter chained to
exposed conduit -- pulling down
Downward pull -- conduit frame adapter
chained to conduit extension
Upward pull -- conduit frame adapter
chained to conduit extension
Conduit frame adapter chained to conduit
-- pulling up
Resting conduit frame adaptor on floor
over conduit and pulling up
Resting conduit frame adaptor on floor
and blocks over conduit and pulling up
Pulling additional cable from junction box
(1) down to junction box (2) using cable
sheave with hook and power head
assembly chained to pole.
Power head assembly chained to 6”
conduit with two 90° bends pulling from
underground conduit using cable
sheave with hook