Gardner Bender CP8006 Powered Cable Puller - Manual (Page 7)

13
3 4 5
6 7 8
9 10 11
Puller suspended using horizontal pull Puller suspended using vertical pull Vertical - pulling up
Underground pulling
Conduit frame adapter with sheave
chained to exposed conduit
Power head assembly being attached to
conduit frame adapter using two lock pins.
Pulling up cable with conduit frame
adapter chained to exposed conduit --
mounted flush
Conduit frame adapter chained to conduit
(over the extension resting on floor)
pulling down
Coupling slipped into conduit. Coupling
clamp locked to coupling with two
thumb screws