Hellwig Air 6091 User Manual
Page 7
8a.
1999– early 2006 models—Driver side panhard axle bracket has a large slotted hole to
insert bolt through as shown. Place 3/8-16x2-3/4” bolts through slotted holes in axle bracket
as shown and attach qty 2 axle straps per side to axle using washers and 3/8” locknuts.
Tighten nuts until legs of axle straps bend slightly.
Relocate brake lines so that they do not
interfere with axle brackets, bolts, straps and air springs.
8b. Late
2006 models on - Driver side panhard axle bracket does not have a large slotted hole.
Place 3/8-16x2-3/4” bolts through slotted holes in axle bracket as shown and attach qty 2 axle
straps to passenger side axle bracket using washers and 3/8” locknuts. Attach 1 axle strap to
outboard side of axle bracket only as shown for early models. Place qty (2) 1/4” thick wash-
ers between axle bracket and panhard axle bracket as shown. Shim axle bracket with addi-
tional flat washers until bracket is parallel with axle. Insert 3/8-16 x 1-1/2 bolt and tighten
locknut to 20 ft-lb. Tighten nuts on axle straps until legs of axle straps bend slightly. Relo-
cate brake lines so that they do not interfere with axle brackets, bolts, straps and air springs.
Slotted hole
Thick washers
6091 ( R-6091)
03/09/07