Technical data, Installation, Replacing the lamp – AEG SKZ71800F0 User Manual

Page 18: Closing the door, Positioning

Advertising
background image

Problem

Possible cause

Solution

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the re-

frigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Service Center

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension of the recess

Height

1780 mm

Width

560 mm

Depth

550 mm

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must ensure

that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

18

Technical data

Advertising
This manual is related to the following products: