AT&T 9341 - Manual (Page 13)

TELEPHONE OPERATION
11
Temporary Tone Dialing
If you have dial pulse (rotary) service, you can change from dial pulse to
touch tone dialing during a call by pressing
*. This is useful if you need to
send touch tone signals for access to telephone banking or long-distance
services.
1 Dial the number.
2 Press
*. Buttons pressed after this send touch tone signals.
3 After you hang up, the phone automatically returns to dial pulse
(rotary) service.
Headset Jack
You can use this telephone hands-free when you install a 2.5 mm headset
(SKU 24099), purchased separately.
Plug the headset into the jack located on the right side of the handset
(under the small rubber flap). Do not force the connection, but make sure
the plug fits securely.
9341_book_1ATT 6/14/00 4:07 PM Page 11