AT&T 2440 - Manual (Page 11)

TELEPHONE OPERATION
AT THE HANDSET
10
Volume
1 During a call, select VOLUME, then use the softkeys to adjust the
earpiece volume.
2 Select OK to save the setting for future calls.
Mute
Mute allows you to hear your caller, but prevents the caller from
hearing you.
1 Use the softkey to select MUTE. The screen alternately displays
MICROPHONE MUTED! and the previous screen.
2 Select MUTE again to return to your conversation.
Hold
When you put a call on hold, you cannot hear your caller, and your caller
cannot hear you.
1 Use the softkey to select HOLD. The screen displays
CALL ON HOLD!
2 Press
P
or
k
to return to the call.
NOTE: The handset rings to remind you that the call is being held.
If you don’t answer the ring, the call is disconnected.
Line in Use
• When the line is in use by a handset or
base, the screen display is similar to:
• When the line is in use by another set on
the same line, the screen displays:
EXTENSION
IN USE!!
VOL MENU MUTE
2
05 NEW CALLS
RDL MENU MEM