Clear-Com HLI-FBS User Manual
Partyline user guide
Advertising
Table of contents
Document Outline
- Document Reference
- 1 Introduction
- 2 User Interfaces
- 3 Installing HelixNet Partyline
- 4 Linking Main Stations
- 5 Configuring and Managing the HMS-4X Main Station
- 5.1 Using the Menus
- 5.2 Configuring the Audio settings
- 5.2.1 Audio settings for the headset
- 5.2.2 Audio settings for the microphone
- 5.2.3 Audio settings for the Program Input
- 5.2.4 Audio settings for Program IFB [Interruptible Foldback]
- 5.2.5 Audio settings for the SA [Stage Announce] Output
- 5.2.6 Audio settings for the Hot Mic Output
- 5.2.7 Audio settings for the Front Panel
- 5.3 Setting Station Settings
- 5.4 Configuring the channel settings
- 5.5 Configuring the Control I/O
- 5.6 Configuring Module Settings
- 5.7 Administration
- 5.8 Diagnostics
- 6 Configuring and Managing the HBP-2X Beltpack
- 7 Using the HMS-4X Main Station
- 8 Using the HBP-2X Beltpack
- 9 Connecting to Other Intercom Systems
- 9.1 Connecting HelixNet Partyline to Encore
- 9.2 Connecting HelixNet Partyline to RTS (Telex) two-wire systems
- 9.3 Connecting HelixNet Partyline to Tempest
- 9.4 Connecting HelixNet Partyline to CellCom / FreeSpeak
- 9.5 Connecting HelixNet Partyline to the DX210
- 9.6 Connecting HelixNet Party-line to Eclipse
- 10 Specifications
- 10.1 Main Station (HMS-4X)
- 10.1.1 Connectors
- 10.1.2 Microphone pre-amplifier
- 10.1.3 Headphone amplifier
- 10.1.4 Loudspeaker amplifier
- 10.1.5 Program line input and Four-wire option module inputs
- 10.1.6 Four-wire module outputs
- 10.1.7 Stage Announce outputs
- 10.1.8 Hot Mic output
- 10.1.9 Helix Digital Partyline
- 10.1.10 Ethernet
- 10.1.11 Mains power
- 10.1.12 Environmental
- 10.1.13 Dimensions and weight
- 10.2 Two-wire module: general
- 10.3 Four-wire module: general
- 10.4 Beltpack (HBP-2X)
- 10.1 Main Station (HMS-4X)
- Appendix A: Compliance
- Appendix B: Menu maps
- Appendix C: Cabling reference
- Appendix D: Troubleshooting