Hach-Lange HACH 5500 sc SiO2 Installation - Manual (Page 15)

Figure 13 Power connection Connect a dual monitor
An external sc controller can connect to the analyzer. Connect a Hach
cable 6789400 to the external sc controller and the dual monitor
connection of the analyzer. Refer to
Wiring connections overview
on page 13.
Connect optional devices
Install the cables for output or input devices as shown in Figure 14 .
Make sure to use the wire gauge that is specified for the connection.
Refer to
Specifications on page 3. To configure a device, refer to the
operations manual.
English 15