Installation – Hach-Lange POLYMETRON 9500 pH_ORP Sensors User Manual User Manual
Page 5
Advertising
Figure 1 Sensors left to right 8350.4, 8350.5 and 8351
1 Glass
3 Platinum ring
2 Tube containing Pt100 temperature sensor
4 PTFE Junction
Figure 2 Sensor 8362
1 AS9 connector
5 Retaining nut for the
measurement chamber
9 Sample out
2 Pt100 temperature sensor
6 Measurement chamber
10 Label to record the sensor
installation date
3 U-bolt
7 Electrodes support
11 Flat surface for wrench
4 Earth terminal
8 Sample in
Figure 3 Sensor 8417
1 Threaded sensor cap
3 Glass membrane
2 Sensor body
Installation
W A R N I N G
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the document.
English 5
Advertising