Hach-Lange SI627 P - Manual (Page 11)

7
3. Installation
ENGLISH
3.1. si627 P
DANGER
Only qualified personnel should conduct the tasks described in this section of the manual.
3.1.1. Assembly
For the si627 P mounting a drill hole is required according to the diagram.
After putting the instrument in the panel, it must be fitted using two clamps as indicated in the figure.
92 mm
3.7 in
92 mm 3.7 in
80 mm
3.1 in
21 mm
0.8 in
7 mm
0.3 in
Plug-in screw connector Clamp to fix to the panel
BNC connector
for electrode
Panel
Drill hole
Side view
si627 P_HACH_LANGE_Ed.0510.indd ANG:7 si627 P_HACH_LANGE_Ed.0510.indd ANG:7 20/5/10 10:50:44 20/5/10 10:50:44