Hach-Lange 5740 sc - Manual (Page 7)

3
Section 1 Specifications
Specifications are subject to change without notice.
Components Corrosion-resistant materials, fully-immersible probe with 10 m (30 ft) cable
Measuring Range (Dissolved Oxygen) 0 to 40 ppm (0 to 40 mg/L) or 200 % saturation
Measuring Range (Temperature) – 5 to 50 °C (23–120 °F)
Probe Operating Temperature – 5 to 50 °C (23–120 °F)
Probe Storage Temperature – 5 to 70 °C (23–158 °F); 95 % relative humidity, non-condensing
Response Time at 20 °C 120 seconds to 90 % of value upon step change
Measurement Accuracy ± 2 % of span
Temperature Accuracy ± 0.2 °C
Temperature Compensator 30K NTC Thermistor
Repeatability ± 0.5 % of span
Sensitivity ± 0.5 % of span
Calibration Air/Sample
Maximum Pressure 10 bar (145 psi)
Probe Cable Length Integral 33 ft (10 m)
Probe Weight 0.26 kg (9.1 oz)
Probe Dimensions See Figure 3 Probe Dimensions on page 8 .
Wetted Materials Noryl, PVC, Viton, Polypropylene, Nylon
Electrode Materials Nickel-chrome and lead
Minimum Flow Rate 0.5 cm/s (0.016 ft/s)
Measuring Principle Galvanic