Hach-Lange SENSION+ PH1 - Manual (Page 9)

5
3. Installation
3.1.1. Component List
Item Number Instrument Electrode Accessories Batteries Manual
LPV2500.98.0002
sensION ™
+
PH 1
–– –– ✓ ✓
LPV2550T.98.002
sensION ™
+
PH 1
LZW5050T.97.002 ✓ (1) ✓ ✓
LPV2551T.98.002
sensION ™
+
PH 1
LZW5051T.97.002 ✓ (1) ✓ ✓
LPV2552T.98.002
sensION ™
+
PH 1
LZW5052T.97.002 ✓ (1) ✓ ✓
LPV2555.98.0002 sensION ™
+
PH 1
LZW5055.97.0002 ✓ (2) ✓ ✓
ENGLISH
WARNING
Risk of falling. Measurements are made directly in situ with this instrument. To prevent the risk of
falling, ensure compliance with all local safety regulations on securing with ropes and on the use of
adequate protective clothing and footwear.
Risk of injury. Do not attach the measuring instrument to your body. The measuring electrode could
be accidentally caught in a motor or stirrer and could endanger the user through the connected
electrode cable.
3.1. Content of the sensION ™+
PH 1
After removing the instrument, check each part for possible damage. All components on the attached list
must be present. If there are any missing or damaged parts, contact the manufacturer or distributor.
3.1.2. Accessories
• Carrying case.
• (1)
Buffer solutions, 125 mL, pH 4.01, pH 7.00
and pH 9.21 (25 °C).
Calibration tubes, pH 4.01, pH 7.00
and pH 9.21.
• (2) Redox standard solution, 125 mL, 220 mV
(25°C).
Tube for redox standard calibration 220 mV.
• KCl 3M, 50 mL.
• Two 90-mL bottles for sample and sensor
cleaning.
• Working electrode protectors (models 2551 T
and 2552 T only).
Fig. 1. Equipment composition
PH1 sensION ™
sensION+ PH1_HACH_LANGE_0710.indd ANG:5 sensION+ PH1_HACH_LANGE_0710.indd ANG:5 7/9/10 15:40:31 7/9/10 15:40:31