Hach-Lange H170 User Manual - Manual (Page 4)

Specification Details
Resolution 0.1 °C (0.1 °F)
Range –0 to 100 °C (32 to 212°F)
Conductivity
Calibration Up to five points
Accuracy ±1% ppt (–2 to +35 °C)
Resolution 0.01 ìS, 0.1 ìS ,1 ìS, 0.01 mS, 0.1 mS
Range Autoranging: 0.00 to 19.99 ìS, 20.0 to 199.9 ìS, 200 to 1999 ìS, 2.00 to 19.99 mS,
20.0 to 199.9 mS
TDS
Calibration Up to five points
Accuracy ±1% full scale or ±1 digit
Resolution 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 ppt, 0.1 ppt, 1 ptt, 0.1 mg/L, 1mg/L ,0.01 gal/L,
0.1 gal/L
Range Autoranging: 0.00 to 9.99 ppm, 10.0 to 99.9 pm, 100 to 999 ppm,1.00 to 9.99 ppt,
10.0 to 99.9 ppt, 100 to 200 ppt
mg/L: 0.00 to 199.9 mg/L, 200 to 1999 mg/L, 2.00 to 19.99 gal/L, 20.0 to 50 gal/L
Salinity
Calibration None (derived from conductivity)
Accuracy ±0.1 ppt, –2 to +35 °C (28.4 to 95 °F )
Resolution 0.1 ppt 1%
Range 0 to 42 ppt
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer’s website.
Safety information
N O T I C E
The manufacturer is not responsible for any damages due to misapplication or misuse of this product including,
without limitation, direct, incidental and consequential damages, and disclaims such damages to the full extent
permitted under applicable law. The user is solely responsible to identify critical application risks and install
appropriate mechanisms to protect processes during a possible equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.
Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury.
4 English