Hach-Lange LDO - Changing sensor cap - Manual (Page 2)

Entering sensor code
There is a 3 or 10-digit sensor code (2) on the packaging (3) supplied and on the
sensor cap (1).
As soon as you have installed a new sensor cap, enter the related code to apply
the factory data.
If the sensor code is entered incorrectly, "SENSOR CODE INVALID" appears
in the display or incorrect measured values are displayed!
Select Menu level Accept
1. MAIN MENU
2. SENSOR SETUP
3. SELECT SENSOR
4. CONFIGURE
5. SENSOR CODE
6.
Move to next position
Select character
7.
MAIN MENU or
Indication of measurement