Hach-Lange NH4D sc Chain Mount Kit - Manual (Page 3)

3
DOC273.52.00147 Instruction Sheet
Chain Mount Kit LZX914.99.12400
Introduction
This instruction sheet describes the installation of the chain mount kit for 1½-inch NPT thread
45° (Cat. No. LZX914.99.12400).
Items supplied are shown in Figure 1 on page 3 . Not all items in the hardware set are required.
Only the parts used in these instructions are listed.
Installation dimensions are shown in Figure 2 on page 4 .
Figure 1 Items supplied with the chain mount kit (LZX914.99.12400)
1 Mounting plate 6 Immersed pipe with 1½-in. NPT thread, 400 mm long
(see
Figure 2 on page 4 for dimensions)
2 Arm bracket 7 Elbow, 45°, 2 x 1½-in. NPT thread
3 Screw top 8 Reducer
4 Set of small parts 9 Plastic chain (see Figure 2 on page 4 for dimensions)
5 Arm (see Figure 2 on page 4 for dimensions)