Hach-Lange Power connection box for SC analyzers - Manual (Page 3)

3
Installation
Safety information
Read the entire instruction sheet carefully before unpacking, setting up or operating this
device. Pay attention to all danger and warning statements. Failure to do so could result in
serious injury to the operator or damage to the device.
To make sure that the protection provided by this device is not impaired, do not use or
install this device in any manner other than that specified in this instruction sheet.
Danger notes in this instruction sheet
Warning labels
Read all labels and tags attached to the device. Failure to do so could result in personal
injury or damage to the device. Symbols shown on the device are noted in this instruction
sheet with a danger or caution statement.
Introduction
In this instruction sheet, the assembly and installation of the power connection box
(catalog number LQV155.99.0000x) is described.
The power connection box serves to connect sc analyzers to a power supply. It offers a
power connection, fuses and power sockets for two sc analyzers.
D A N G E R
Indicates a potentially or imminently hazardous situation that, if not avoided, can result in death or
serious injury.
WA R N I N G
Indicates a potentially or imminently dangerous situation that, if it is not avoided, can lead to
death or to serious injuries.
C A U T I O N
Indicates a possible dangerous situation that can have minor or moderate injuries as the result.
N O T I C E
Indicates a situation that, if it is not avoided, can lead to damage to the device. Information that
requires special emphasis.
If shown on the device, this symbol references the user manual for operation and/or for safety information.
This symbol may be shown on a product enclosure or barrier and indicates a risk of electric shock and/or a risk of
death by electrocution.
Electrical devices marked with this symbol may no longer be disposed of in unsorted domestic or industrial waste in
Europe after August 12, 2005. In conformity with the provisions in force (EU Directive 2002/96/EC), consumers in
the EU must return old electrical devices to the manufacturer for disposal from this date. This is free for the
consumer.
Note: Contact the manufacturer or supplier for instructions on how to return end-of-life devices,
manufacturer-supplied electrical accessories, and all auxiliary items for proper disposal.
D A N G E R
Risk of electric shock. The procedures described in this instruction sheet may only be performed
by qualified personnel.