Hach-Lange DR 3800 Additional Software LINK2SC - Manual (Page 20)

8
Operation
3.2.2 Adjust the laboratory data
With the Store On setting, the laboratory data are automatically
stored with the date and time after each measurement (Refer to the
DR 3800 user manual for more information).
For a better comparison with the sc1000 data, it is possible to
adjust the laboratory data to the time of the sampling.
1. Press the highlighted date and time field.
The date and time are divided over a number of fields.
2. Press the appropriate field and use the UP and DOWN arrows
to change the value.
3. Press OK to confirm. The instrument will return to the displayed
measured value.
4. Press the highlighted date and time field of each measured
value to adjust the date and time to the sampling data.